How to Hide TV Wires Mounted on a Wall


A wall-mounted TV can be a showstopper in any home. That is always the intended effect, yet too often there’s simply a tangled mess of cords awkwardly hanging off the wall. Figuring out how to hide TV wires on a wall mount can be a real head-scratcher for many. Some even endure sleepless nights thinking “How do I hide TV wires on a wall?!?” But, before you give up and decide to live with the frustration of a bunch of ugly wiring spoiling your TV viewing experience, let us assure you it’s not THAT complicated and there are some relatively easy solutions!

Here are Ways to Hide Your TV Wires on the Wall

Use hooks behind your furniture to hide TV wires

A DIY-hack for packing away all of those pesky wires hanging from your wall-mounted TV is to use plastic hooks/pegs. These are easily available in hardware stores or online. All you have to do is attach the hooks to the back edge of your furniture and anchor the cords to them. Once the cords are hooked in, they will hide behind the silhouette of your furniture seamlessly. Simply press each clip in place for around 30 seconds or so, and let the adhesive rest and stick to your furniture for about half an hour, then it should be sticky enough to hold the weight of the wires.

This tip doesn’t just work when you are trying to hide TV wires, but also when you need to arrange cords and cables at your work desk.

The one downside of this solution is that it is temporary, since the hooks may need to be replaced from time to time. Also, this hack only works if you have a piece of furniture placed right below your wall-mounted TV. For those who already have a built-in solution for how to hide TV wires.

Use cord covers to hide TV wires

A hack for how to hide tv wires over the fireplace is to use plastic cord covers that attach directly to the wall above it and conceal the wires.

You can purchase these online or at your local hardware store. To successfully hide TV wires, you first have to measure the wall between the base of the screen and the floor. This represents the length of wire you need to hide, so you can go ahead and cut your card cover according to this measurement. Once that’s complete, firmly attach the raceway base to the wall with screws and snap the cover in place. Be sure that you’re equipped with all of the necessary tools you need to complete this operation - namely, a hacksaw, screws, and a screwdriver. You could also purchase some paint that is the same color as your wall and paint the cord covers for a more seamless look.

Using this method for how to hide tv wires on a wall is pretty labor-intensive and requires you to have some carpentry skills. Also, the success of this operation depends entirely on how well you execute it. After all, if the positioning of the cord cover is sloppy, it could be an eye-sore and a distraction that diminished your home entertainment satisfaction. So, if you’re going down this road, do your homework!

Hide TV Wires Behind the Wall

This solution is even more intense than the previous one, but it is a sure-shot way of getting your TV cables out of sight and out of mind for good! You can simply hide the wires behind the wall the TV is mounted on using recessed cable plates. You will need a stud finder, a utility knife, and some nifty finger work. Firstly, remove your TV from the wall. Use the stud finder to locate two stud-free panels on the wall. One of these should be behind where the screen ideally sits, and the other should be near the bottom of the wall/near the closest outlet. Once you’ve identified these, use your utility knife to make one hole on each of these spots, which is big enough to fit two cable plates, as well as feed the TV cables in and out of the wall. Once you’re done, you are all set with a seemingly “wireless” home entertainment set-up that is sure to wow your friends and family!

There are cons of this method, however. As mentioned before, it requires a significant amount of effort and skill to pull this off. Also, this method is relatively permanent, so it isn’t the best option for people living in rented homes, since it causes damage to the wall. Think this option through carefully.

Get the Best of all Worlds with MantelMount

MantelMount is arguably the best pull down TV mount on the market and THE answer for how to hide tv wires over a brick fireplace. State-of-the-art counterbalance technology and automotive pistons make it possible for anyone to pull down a heavy wall-mounted TV with ease. This TV mount can not only move up and down, but also swivel from left to right, giving you the ultimate freedom in motion to find the perfect viewing angle. All MantelMount pull down TV mounts come with a wire-management system. MantelMount provides cable tie anchors that attach to the TV mount’s lifting arm and help organize and conceal the wires, making MantelMount the solution for how to hide TV wires on a wall mount. With MantelMount, you don’t just get a TV mount. You get a well thought out product that assures the perfect home theater experience for the entire family.